D type multistage centrifugal pump – Multistage water pump

D Horizontal Multistage Pump,

D multistage centrifugal clean water pump,

Multistage centrifugal pump，

horizontal multistage pump，

D multistage centrifugal cleaning pump,

DF multistage corrosion resistant centrifugal pump,

DY multistage centrifugal oil pump,

MD multistage wear-resisting centrifugal pump,

DF stainless steel multistage corrosion resistant centrifugal pump,

DF corrosion resistant multistage centrifugal pump,

 

D horizontal multistage pump significance of model：

 

Example: D/ DF/ DY /MD 46-30 *4
D – multistage centrifugal cleaning pump
DF — multistage corrosion resistant centrifugal pump
DY – multistage centrifugal oil pump
MD – multistage wear-resisting centrifugal pump
46 — Design point flow is 46m3/h
30 — Design point single stage lift is 30m
4 – The series is level 4

Example: 100D/ DF/ DY /MD 16 * 3
100 – Pump suction diameter is 100mm
D – multistage centrifugal cleaning pump
DF — multistage corrosion resistant centrifugal pump
DY – multistage centrifugal oil pump
MD – multistage wear-resisting centrifugal pump
16 — Design point single stage lift 16m
3 – The series is 3 levels

 

D horizontal multistage pump description：

D series horizontal multistage pump is a side suction (or vertical suction), vertical delivery, ring section type centrifugal pump with diffuser type casing.  Available in various sizes, hydraulics and material combinations, the multistage pump is suited for a wide range of site conditions, including clear water, neutral mineral water with particles occupied less than 1.5% and size less than 0.5mm, corrosive liquid without solid particles etc, which temperature is 0℃- 105℃.

D horizontal multistage pump construction:

The multistage pump is consisted of stator, rotor, bearing, shaft seal.
1. Stator: consisted of suction casing, discharge casing and diffuser. The casing are held together by external tie rod.
2. Rotor: consist of shaft, impellers, balance disc and shaft sleeve etc.
3. Bearing parts: consisted of bearing housing, bearing and bearing cover. It’s generally rolling bearing lubricated by grease.
4. Shaft seal: packing seal or mechanical seal.